FLW-T Series Specification
Laser Welding vs Traditional Welding
TRADITIONAL WELDING
LASER WELDING
- Very high heat input
- Large material distortion and undercut
- Moderate bonding strength
- Requires polishing and finishing
- Standard welding speed
- Limited material compatibility
- Complex to operate
- Lower safety levels
- Not environmentally friendly
- No swing welding capability
- Fixed spot width
- Visible weld marks
- Standard overall quality
- Low heat input
- Minimal distortion and clean finish
- Strong bonding to base material
- Little to no post processing required
- Over 3 times faster welding speed
- Works on steel, aluminium, copper and more
- Simple and easy to operate
- Improved operator safety
- Environmentally friendly process
- Swing welding capability
- Adjustable spot width
- Clean, nearly invisible welds
- High precision and superior quality
TECHNICAL INDICATORS
TECHNICAL PARAMETERS
- Device Name
- Laser Power Options
- Laser Generator
- Laser Wavelength
- Optical Fiber Core
- Fiber Length
- Operating Mode
- Scan Width
- Welding Speed
- Cooling System
- Working Temperature Range
- Working Humidity Range
- Maximum Welding Thickness
- Operating Voltage
- Total Power
- Consumption
- Machine Dimensions
Welding Thickness by Power Output
The welding capacity varies depending on the machine power level and material type:
1500W
Carbon Steel (N₂ / Ar): up to 4 mm
Stainless Steel (N₂ / Ar): up to 4 mm
Aluminium (N₂): up to 3 mm
Galvanized Sheet (N₂ / Ar): up to 3 mm
The machine comes standard with a single wire feeder.
If the customer requires a double wire feeder, an additional cost will be charged.
1.5kW welding machine supports both single and double wire feeding, operating on single-phase 220V 50/60Hz.
2000W
Carbon Steel (N₂ / Ar): up to 5.5 mm
Stainless Steel (N₂ / Ar): up to 5 mm
Aluminium (N₂): up to 4 mm
Galvanized Sheet (N₂ / Ar): up to 4 mm
The machine comes standard with a single wire feeder.
If the customer requires a double wire feeder, an additional cost will be charged.
A 2kW welding machine supports both single and double wire feeding, operating on single-phase 220V 50/60Hz.
3000W
Carbon Steel (N₂ / Ar): up to 8 mm
Stainless Steel (N₂ / Ar): up to 8 mm
Aluminium (N₂): up to 5 mm
Galvanized Sheet (N₂ / Ar): up to 5 mm
The machine comes standard with a single wire feeder.
If the customer requires a double wire feeder, an additional cost will be charged.
A 3kW welding machine supports both single and double wire feeding, operating on three-phase 380V 50/60Hz.
Operate anywhere with support for 30+ global languages, designed for international use.
